Can mhpmevent11h be accessed from any privilege level?
No. The official CSR table lists mhpmevent11h as a Machine-mode MRW CSR; it exists only on RV32 when Sscofpmf is implemented.
CSR Bit Fields
RISC-V mhpmevent11h CSR Register
Address 0x72BPrivilege MachineAccess RW / RV32 high-half / 32-bitMachine counters and performance-monitoring CSRs
mhpmevent11h at 0x72B is the RV32 high-half CSR for bits 63:32 of mhpmevent11, provided with Sscofpmf.
Bit Overview
Hover for details · Click to jumpbit 3 = only bit 3; bits 12..11 = bits 12 down to 11
MSBLSB
Field Map
Understand mhpmevent11h By Bit Fields
0 key fields
Official Basis & Search Notes
mhpmevent11h is not an independent event selector; it is the RV32 access window for the upper 32 bits of mhpmevent11. It carries Sscofpmf OF and mode-filtering fields.
Sscofpmf standardizes mhpmevent11[63:58] as OF and xINH fields.
mhpmevent11h[31:26] correspond to those standardized upper bits.
The upper event-selector bits remain part of the platform-defined event encoding.
What To Check First When Reading This CSR
- - mhpmevent11h is an RV32-only high-half CSR provided with Sscofpmf.
- - Reading it is equivalent to reading bits 63:32 of mhpmevent11.
- - If Supervisor mode is implemented, the OF bit can also be observed through the corresponding read-only shadow bit in scountovf.
Risk Checks Before Writing
- - Preserve WPRI bits, and do not change EVENT_HI without knowing the platform event encoding.
- - Writing mhpmevent11h changes the upper 32 bits of mhpmevent11, including OF and xINH controls.
Put It Back Into A Real Flow
1
On RV32, read mhpmevent11h to inspect the upper-half state of mhpmevent11.
2
Handle OF or mode-filtering bits as needed.
3
If Supervisor mode is implemented, check overflow state together with mhpmcounter11 readings and scountovf.
FAQ
Should mhpmevent11h and mhpmevent11 be written together?
On RV32, mhpmevent11h reads and writes bits 63:32 of mhpmevent11; accesses to the low-half CSR affect only bits 31:0.